Wilo-Stratos GIGA B
Maximum performance at the highest levels of energy efficiency. The Wilo-Stratos GIGA B is the ideal high-efficiency pump for use in heating, air conditioning and cooling applications in buildings where large volumes of water have to be pumped to great delivery heads. Recommended services Wilo-Live Assistant Supervision Commissioning
Design
High-efficiency monobloc pump with EC motor and electronic power adjustment in glanded pump design Version as single-stage low-pressure centrifugal pump with flange connection and mechanical seal.
Application
The pumping of heating water (in accordance with VDI 2035), chilled water and water-glycol mixtures without abrasive substances in heating, chilled water and cooling systems.
Equipment/function
Operating modes
- Δp-c for constant differential pressure
 - Δp-v for variable differential pressure
 - PID-Control
 - Constant speed (n=constant)
 
Manual operation level
- Green button and display
 
Manual functions
- Differential pressure setpoint setting
 - Setting the speed (manual control mode)
 - Setting the operating mode
 - Setting the pump ON/OFF
 - Configuration of all operating parameters
 - Fault acknowledgement
 
External control functions
- «Overriding Off» control input
 - «External pump cycling» control input (only effective in twin-head pump operation)
 - Analogue input 0 — 10 V, 0 — 20 mA for constant speed (DDC) and remote setpoint adjustment
 - Analogue input 2 — 10 V, 4 — 20 mA for constant speed (DDC) and remote setpoint adjustment
 - Analogue input 0 — 10 V for actual value signal from pressure sensor
 - Analogue input 2 — 10 V, 0 — 20 mA, 4 — 20 mA for actual value signal from pressure sensor
 
Signal and display functions
- Collective fault signal SSM
 - Collective run signal SBM
 
Data exchange
- Infrared interface for wireless data exchange with IR-Monitor/IR-Stick
 - Plug-in position for Wilo IF-Modules (Modbus, BACnet, CAN, PLR, LON) for connection to building automation
 
Safety functions
- Full motor protection with integrated trip electronics
 - Access disable
 
Dual pump management (2 x single pump, Y-piece application only)
- Main/standby operation (automatic fault-actuated switchover)
 - Pump cycling main/standby operation after 24 hours
 - Parallel operation
 
Typekey
Example  | 
   Wilo-Stratos GIGA B 40/1-51/4.5  | 
  
Stratos GIGA  | 
   High-efficiency pump  | 
  
B  | 
   Monobloc design  | 
  
40  | 
   Nominal diameter DN of the flange connection (for Stratos GIGA B: discharge side) [mm]  | 
  
1-51  | 
   1 = lowest selectable delivery head [m] 51 = highest selectable delivery head [m]  | 
  
4.5  | 
   Rated power P2 in [kW]  | 
  
-xx  | 
   Version: E.g. R1 — version without differential pressure sensor  | 
  
Technical data
- Permitted temperature range of the fluid: -20 °C to +140 °C
 - Mechanical seal for pumping water up to Tmax = +140 °C. Up to T <= +40 °C, a glycol admixture of 20 % to 40 % by volume is permissible. An alternative mechanical seal must be provided for water-glycol mixtures with a glycol content of > 40% to max. 50% by volume and a fluid temperature of > +40 °C to max. +120 °C or other fluids that differ from water. When using water-glycol mixtures, the use of an S1 variant with a corresponding mechanical seal is generally recommended.
 - Mains connection:
 - 3~440 V +-10 %, 50/60 Hz
 - 3~400 V +-10 %, 50/60 Hz
 - 3~380 V -5% +10%, 50/60 Hz
 
Compliance with electromagnetic compatibility without additional measures:
- 
   
- Interference emission for residential environment according to EN 61800-3:2018
 - Interference immunity for industrial environments according to EN 61800-3:2018
 
 - Protection class IP55
 - Max. operating pressure 16 bar up to +120 °C, 13 bar up to +140 °C
 
Materials
- Pump housing and lantern: EN-GJL-250
 - Impeller: PPS-GF40
 - Shaft: 1.4122
 - Mechanical seal: AQEGG; other mechanical seals on request
 
Scope of delivery
- Pump
 - Installation and operating instructions
 
Accessories
- 1 mounting bracket with fixation material for installation on a base
 - Installation aid for mechanical seal
 - IR-Monitor
 - IR-Stick
 - IF module PLR for connecting to PLR/interface converter
 - IF module LON for connection to the LONWORKS mains network
 - IF module BACnet
 - IF module Modbus
 - IF module CAN
 - Control system VR-HVAC
 - Control system CCe-HVAC
 - Control system SCe-HVAC
 - Differential pressure sensor kits 0 — 10 V for pumps in version ...-R1
 
Typekey
Example  | 
   Wilo-Stratos GIGA B 40/1-51/4.5  | 
  
Stratos GIGA  | 
   High-efficiency pump  | 
  
B  | 
   Monobloc design  | 
  
40  | 
   Nominal diameter DN of the flange connection (for Stratos GIGA B: discharge side) [mm]  | 
  
1-51  | 
   1 = lowest selectable delivery head [m] 51 = highest selectable delivery head [m]  | 
  
4.5  | 
   Rated power P2 in [kW]  | 
  
-xx  | 
   Version: E.g. R1 — version without differential pressure sensor  | 
  
Technical data
- Permitted temperature range of the fluid: -20 °C to +140 °C
 - Mechanical seal for pumping water up to Tmax = +140 °C. Up to T <= +40 °C, a glycol admixture of 20 % to 40 % by volume is permissible. An alternative mechanical seal must be provided for water-glycol mixtures with a glycol content of > 40% to max. 50% by volume and a fluid temperature of > +40 °C to max. +120 °C or other fluids that differ from water. When using water-glycol mixtures, the use of an S1 variant with a corresponding mechanical seal is generally recommended.
 - Mains connection:
 - 3~440 V +-10 %, 50/60 Hz
 - 3~400 V +-10 %, 50/60 Hz
 - 3~380 V -5% +10%, 50/60 Hz
 
Compliance with electromagnetic compatibility without additional measures:
- 
   
- Interference emission for residential environment according to EN 61800-3:2018
 - Interference immunity for industrial environments according to EN 61800-3:2018
 
 - Protection class IP55
 - Max. operating pressure 16 bar up to +120 °C, 13 bar up to +140 °C
 
Materials
- Pump housing and lantern: EN-GJL-250
 - Impeller: PPS-GF40
 - Shaft: 1.4122
 - Mechanical seal: AQEGG; other mechanical seals on request
 
Scope of delivery
- Pump
 - Installation and operating instructions
 
Accessories
- 1 mounting bracket with fixation material for installation on a base
 - Installation aid for mechanical seal
 - IR-Monitor
 - IR-Stick
 - IF module PLR for connecting to PLR/interface converter
 - IF module LON for connection to the LONWORKS mains network
 - IF module BACnet
 - IF module Modbus
 - IF module CAN
 - Control system VR-HVAC
 - Control system CCe-HVAC
 - Control system SCe-HVAC
 - Differential pressure sensor kits 0 — 10 V for pumps in version ...-R1