Wilo-FLA-2

Pressure-boosting system for firefighting systems with indirect connection in accordance with DIN 14462.

With 2 vertical stainless steel high-pressure multistage centrifugal pumps in glanded version

Fully automatic water supply for firefighting systems with wall hydrants of the type «F» in domestic, commercial and public buildings, hotels, hospitals, shopping centres and also offices and industrial buildings

• 2 Helix FIRST V 16, 22, 36, 52 or MVI 70 series pumps, equipped with IE2 motors
• Automatic pump control via FLA control unit
• Components that come in contact with the fluid are corrosion-resistant
• Base frame made of galvanised steel, with height-adjustable vibration absorbers for insulation against structure-borne noise
• Pipework made of 1.4301 stainless steel
• Gear-operated shut-off ball cock or annular shut-off valve on the suction and pressure side of every pump
• Non-return valve, pressure side
• Throttle valve of stainless steel 1.4571 on the suction side of every pump
• Pressure switch, on the pressure side
• Pressure gauge, on the pressure side
• Diaphragm pressure vessel 8 l, PN 16, on the pressure side
• Accessories: Atmospherically ventilated break tank in accordance with DIN 14462 with free exhaust in accordance with EN 13077, type AB in accordance with DIN EN 1717

• Mains connection 3~400 V, 50 Hz
• Max. fluid temperature 50 °C
• Operating pressure 10 or 16 bar
• Inlet pressure from break tank < 1 bar
• Nominal connection diameter on pressure side R 2″ - DN 125
• Nominal connection diameter on suction side Rp 2" — DN 125
• Operating unit protection class IP 54

• Impellers, diffusers, stage housing made of stainless steel 1.4307
• Pump housing made of EN-GJL-250, cataphoretically coated
• Shaft of stainless steel 1.4057
• 1.4404 shaft protection sleeve
• O-Ring gaskets made of EPDM (FKM gasket on request)
• Pipework made of 1.4301 stainless steel

• Base frame: made of electrolytically galvanised steel and provided with height-adjustable vibration absorbers for comprehensive insulation against structure-borne noise; other versions on request
• Pipework: complete pipework made of stainless steel 1.4301, suitable for the connection of all conventional piping materials; the pipework is dimensioned according to the overall hydraulic performance of the FLA pressure boosting system
• Pumps: Helix FIRST V 16, 22, 36, 52 and MVI 70 series pumps; all pump components in contact with fluid are made of stainless steel/EN-GJL-250, with cataphoretic coating. For more information about the pump, please refer to the catalogue section «High-pressure multistage centrifugal pumps»
• Valves: For each pump, the non-return valve has a 1.4571 needle-type throttle for returning the bypass volume flow to the break tank. All throttle valves and shut-off devices are sealed and protected against unauthorised adjustment. The pumps are equipped with an automatic air vent valve on the top of the hydraulics.
• Diaphragm pressure vessel: 8 l/PN 16 arranged on the discharge side. For testing and inspection purposes, equipped with a special throughflow fitting that enables the diaphragm pressure vessel to be shut-off and drained
• Pressure switch: A pressure switch arranged on the discharge side, for activation of the central FLA controller
• Pressure indication: Pressure gauge (ø 63 mm) on the discharge side; additional digital display of operating pressure and setting parameters in the FLA controller
• Control device/controller: The system is equipped with a specific FLA controller as standard

• Factory-mounted, connection-ready pressure boosting system checked for functionality and impermeability
• Packaging
• Installation and operating instructions

• Mains connection 3~400 V, 50 Hz
• Max. fluid temperature 50 °C
• Operating pressure 10 or 16 bar
• Inlet pressure from break tank < 1 bar
• Nominal connection diameter on pressure side R 2″ - DN 125
• Nominal connection diameter on suction side Rp 2" — DN 125
• Operating unit protection class IP 54

• Impellers, diffusers, stage housing made of stainless steel 1.4307
• Pump housing made of EN-GJL-250, cataphoretically coated
• Shaft of stainless steel 1.4057
• 1.4404 shaft protection sleeve
• O-Ring gaskets made of EPDM (FKM gasket on request)
• Pipework made of 1.4301 stainless steel

• Base frame: made of electrolytically galvanised steel and provided with height-adjustable vibration absorbers for comprehensive insulation against structure-borne noise; other versions on request
• Pipework: complete pipework made of stainless steel 1.4301, suitable for the connection of all conventional piping materials; the pipework is dimensioned according to the overall hydraulic performance of the FLA pressure boosting system
• Pumps: Helix FIRST V 16, 22, 36, 52 and MVI 70 series pumps; all pump components in contact with fluid are made of stainless steel/EN-GJL-250, with cataphoretic coating. For more information about the pump, please refer to the catalogue section «High-pressure multistage centrifugal pumps»
• Valves: For each pump, the non-return valve has a 1.4571 needle-type throttle for returning the bypass volume flow to the break tank. All throttle valves and shut-off devices are sealed and protected against unauthorised adjustment. The pumps are equipped with an automatic air vent valve on the top of the hydraulics.
• Diaphragm pressure vessel: 8 l/PN 16 arranged on the discharge side. For testing and inspection purposes, equipped with a special throughflow fitting that enables the diaphragm pressure vessel to be shut-off and drained
• Pressure switch: A pressure switch arranged on the discharge side, for activation of the central FLA controller
• Pressure indication: Pressure gauge (ø 63 mm) on the discharge side; additional digital display of operating pressure and setting parameters in the FLA controller
• Control device/controller: The system is equipped with a specific FLA controller as standard

• Factory-mounted, connection-ready pressure boosting system checked for functionality and impermeability
• Packaging
• Installation and operating instructions